Model | HGJ/HTJ-4NEII | HGJ/HTJ-10NEII | HGJ/HTJ-30NEII | HGJ/HTJ-100NEII |
---|---|---|---|---|
Workpiece Weight (kg) | 0.1 to 3 | 0.1 to 8 | 0.3 to 20 | 1 to 80 |
Max. Weight Under Uniform Load (kg) | 4 | 10 | 30 | 100 |
Max. Workpiece Diameter (mm) | 500 | 760 | ||
Workpiece, Shaft Diameter
(Roller bearing) -Standard (mm)(1) |
5 to 25 | 10 to 40 | 10 to 80 | |
Workpiece, Shaft Diameter
(Roller bearing) -Special (mm)(1) |
25 to 40 | 40 to 60 | 80 to 120 | |
Installation method | Table type | Floor-mounted type | ||
Max. Effective Span (mm) (2) | 500 | 800 | ||
Testing Speed (rpm) | 1200/2400 | 800/1600 | 600/1200/1600 | |
Drive motor (w) | 0.2 | 3.7 | ||
Method of speed change | Variable speed | |||
Min. Achievable residual unbalance (µm) (2) | 0.5 (mass eccentricity for a workpiece of max. weight) | |||
Min. Achievable Unbalance on One-Plane (g・mm) (3) | 0.2 | 0.4 | 0.6 | |
Type of Universal Joint | UJB-6 | UJB-8 | UJB-12 | TL-58 |
Size (W×D×H mm) | 1000×590×940 | 1800×500×1500 | ||
Weight (kg) | 300 | 800 | ||
Power supply | Single-phase 200V 10A 2KVA | 3-phase 200V 30A 10KVA |
Model | HGJ/HTJ-400NEII | HGJ/HTJ-1000NEII | HGJ/HTJ-3000NEII |
---|---|---|---|
Workpiece Weight (kg) | 4 to 300 | 10 to 800 | 30 to 2500 |
Max. Weight Under Uniform Load (kg) | 400 | 1000 | 3000 |
Max. Workpiece Diameter (mm) | 1000 | 1300 | 1600 |
Workpiece, Shaft Diameter
(Roller bearing) -Standard (mm)(1) |
20 to 100 | 30 to 140 | 30 to 140 |
Workpiece, Shaft Diameter
(Roller bearing) -Special (mm)(1) |
100 to 150 | 140 to 200 | 140 to 200 |
Installation method | Floor-mounted type | ||
Max. Effective Span (mm) (2) | 1000 | 1500 | 3000 |
Testing Speed (rpm) | 300/490/740/1200 | 260/410/620/1000 | 250/400/625/1000 |
Drive motor (w) | 3.7 | 11 | 11 |
Method of speed change | Variable speed | ||
Min. Achievable residual unbalance (µm) (2) | 0.5 (mass eccentricity for a workpiece of max. weight) | ||
Min. Achievable Unbalance on One-Plane (g・mm) (3) | 1 | 1.5 | 2 |
Type of Universal Joint | TL-65 | TL-90 | A100T |
Size (W×D×H mm) | 2000×550×1700 | 2600×700×1750 | 4500×900×1800 |
Weight (kg) | 1000 | 2500 | 4000 |
Power supply | 3-phase 200V 30A 10KVA | 3-phase 200V 75A 26KVA |
Medium to large rotating parts, tires, crankshafts, large rotors, fans, turbines, pumps, automotive parts, and rotating parts
in general.
(1) Standard machines include one standard bearing. Cost estimates for special bearings are available on request.
(2) The valid interval is the distance from the joint end to the far stand.
(3) The minimal achievable residual unbalance will vary with the workpiece weight and the test speed. Refer
to the attached sensitivity diagram for details.
(4) Sensitivity at 1,800 rpm